Advertisement
Quick Links
Advertisement
Related Manuals for Genie Load Lifter 5.5
Summary of Contents for Genie Load Lifter 5.5
- Page 1 Operator’s Manual Third Edition Second Printing Part No. 82299...
-
Page 2: Table Of Contents
Internet: http://www.genielift.com Third Edition: Second Printing, January 2004 e-mail: techpub@genieind.com "Genie" is a registered trademark of Genie Industries in the U.S.A. and many other countries. "Load Lifter" is a trademark of Genie Industries. Printed on recycled paper Printed in U.S.A. -
Page 3: Safety
You read, understand and obey employer's safety rules and worksite regulations. You read, understand and obey all applicable governmental regulations. You are properly trained to safely operate the machine. Part No. 82299 Genie Load Lifter... - Page 4 Do not use blocks to level the machine. the machine on an incline, slope or stairs. Do not operate the machine in strong or gusty winds. Increasing the load surface area will decrease machine stability in windy conditions. Genie Load Lifter Part No. 82299...
- Page 5 Maintain a firm grasp on the winch handle until the Unauthorized personnel may attempt to operate the brake is locked. The brake is locked when the load machine without proper instruction, creating an will not cause the winch handle to turn. unsafe condition. Part No. 82299 Genie Load Lifter...
- Page 6 Operator's Manual Third Edition • Second Printing SAFETY RULES Decal Legend Genie product decals use symbols, color coding and signal words to identify the following: Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
-
Page 7: Legend
6 Inner frame 15 Inner frame glide button 24 Winch (under plate) 7 Outer frame 16 Front leg caster (option) 25 Winch mounting plate 8 Cable 17 Leg lock bolt 9 Roller wheel 18 Leg spring Part No. 82299 Genie Load Lifter... -
Page 8: Pre-Operation Inspection
3 Always perform function tests prior to use. function tests. 4 Inspect the workplace. 5 Only use the machine as it was intended. Genie Load Lifter Part No. 82299... - Page 9 Legs lowered. Glide buttons and roller wheels Inner and outer frames Cable anchor Cable and pulleys Wheels Casters (if equipped) Load platform Nuts, bolts and other fasteners Cable (kinks, frays, abrasions) Part No. 82299 Genie Load Lifter...
-
Page 10: Function Tests
3 Always perform function tests prior to use. Know and understand the function tests before going on to the next section. 4 Inspect the workplace. 5 Only use the machine as it was intended. Genie Load Lifter Part No. 82299... - Page 11 9 Rotate the winch handle counterclockwise to lower the platform. Result: The inner frame and the carriage should lower into the outer frame. The carriage and inner frame should move smoothly, free of hesitation and binding. Part No. 82299 Genie Load Lifter...
-
Page 12: Workplace Inspection
It is the operator's responsibility to read and remember the workplace hazards, then watch for and avoid them while moving, setting up and operating the machine. Genie Load Lifter Part No. 82299... -
Page 13: Operating Instructions
That means every new operator should perform a pre- operation inspection, function tests and a workplace inspection before using the machine. Part No. 82299 Genie Load Lifter... - Page 14 · Do not allow the machine to become unbalanced. · Continue carefully up or down the stairs. · Use the appropriate number of people and proper lifting techniques with heavy loads. Genie Load Lifter Part No. 82299...
-
Page 15: Decals
Quantity 33468 Warning - No Riders 35567 Warning - Bodily Injury Hazard 35546 Warning - Machine Safety 52981 Cosmetic - Genie Load Lifter 35547 Notice - Machine Setup 44754 Label - Raise / Lower 35552 Warning - Tip-over 97529 Caution - Bodily Injury Hazard... - Page 16 Part No. Description Quantity Part No. Description Quantity 52981 Cosmetic - Genie Load Lifter 97514 Notice - Maximum Capacity, 91 kg 82487 Label - Read the Manual 97532 Warning - Bodily Injury Hazard...
-
Page 17: Specifications
45 in 1.14 m Width 43 cm Load Height 2 in 5 cm Width 52 cm Airborne Noise Emissions 78 dB by Machinery Maximum sound level at normal operating workstations (A-weighted) Component Mounting Locations Part No. 82299 Genie Load Lifter... - Page 18 Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone +61 7 3375 1660 Fax +61 7 3375 1002 Genie China Genie Scandinavia Phone +86 21 53852570 Phone +46 31 3409612 Fax +86 21 53852569...