Viessmann VIESMANN VITOLIGNO 300-H Technical Manual page 44

Fuel storage
(cont.)
Room discharge with suction wands and manual changeover unit
H
G
F
E
A Wooden boards
B Changeover unit
C Vitoligno 300-H with pellet hopper
D Deflector
E Return air connector (Storz coupling)
a
b
Information on storage room accessories
Protective boards with Z brackets
A
6
A Z bracket (length 2000 mm)
B Protective board (30 mm thick; on-site)
C Door to the storage room
VIESMANN
44
A
a
b
mm
mm approx. 3000
B A
C
B C
D
F Suction wands
G Fill connector (Storz coupling)
H Pellet supply hoses and return air hoses
For information on the hoses, see page 45.
100
Z brackets are available as accessories for installation of the protective
boards.
Never install Z brackets up to the ceiling, to facilitate the removal or
addition of protective boards.
VITOLIGNO 300-H