d
Fit the tabs on the back cover with the
grooves on the main unit, press firmly in the
direction of the arrow to close
• Attach the battery cover securely making sure that there
are not tabs come off from the main unit to maintain
waterproofness/dustproofness.
* See "Notes on waterproofness and dustproofness" ( P.20).
Removing the battery pack
a
Put your finger on the battery cover
removing part to lift up the battery cover
• Lift the battery cover vertically until the inside tabs go off.
Battery cover removing part
32
b
Removing the battery pack
• Use the tab of the battery pack and lift up the battery in
the direction of the arrow to remove.
• Lifting up from other than the tab might cause damage the
main unit or connection part of the battery pack.
Removing tab
micro au IC-Card
Your phone number etc. is recorded in
the micro au IC-Card. If the micro au IC-
Card is not correctly attached to the
ISW13F, outgoing and receiving calls,
sending and receiving mails cannot be
operated. Besides, other functions using your phone number
etc. may not be used.
The ISW13F supports only micro au IC-Cards. You cannot
use the product replacing the micro au IC-Card with an au IC-
Card used on an au cell phone or au smartphone.
Attaching/removing micro au IC-Card
• Before attaching/removing the micro au IC-Card, make
sure to turn the ISW13F off and remove the battery pack.
micro au IC-Card
IC (metal part)