Attaching/Removing Battery Pack/Battery Cover; Attaching The Battery Pack - Fujitsu Arrows Z IS Series Basic Manual

b
Rub your finger over the cover in the
direction of arrow to ensure that the cover is
not partially open
Attaching/removing battery pack/
battery cover
• Before attaching/removing the battery pack and battery
cover, turn the power off.
• When attaching/removing the battery cover, hold the
ISW13F in your hand to prevent its screen from being
scratched.
• Wipe off water from the ISW13F before removing the
battery cover.
• Never change the battery pack with wet hands.
• Use a battery pack dedicated to the ISW13F
Attaching the battery pack
a
Put your finger on the battery cover
removing part to lift up the battery cover
• Lift the battery cover vertically until the inside tabs go off.
Battery cover removing part
b
Attaching the battery pack
• With the side showing
contacts of the battery pack with those of the ISW13F,
insert in the direction of the arrow.
• Make sure its shape and insert in the correct direction.
Terminal part
c
Check the orientation of the back cover to
put on the main unit. Then hold the entire
cover
facing up, align the metal
31