Installation manual
Make sure all adjusting feet,
NOT just the ones at the end of
the case, are adjusted firmly to
ensure case does not sag
Mounting fixtures
Replace any racks and shelves etc that may have been removed during installation, to store requirements
Commissioning
Cleaning case
•
Remove the PVC protective coating on stainless steel, where applicable
•
Remove any residue, silicon or tape marks with a cloth moistened with rubbing alcohol
•
Remove all debris from in and around the case
_________________________________________________________________________________________________________________________
Page 7
NOTE
It is important that all cases are level for correct
case operation.
Figure 6
Case levelling
NOTE
Incorrect shelf configurations may
compromise case performance.
H1 Self Contained Multideck
Hussmann