Mitsubishi 900 Series User Manual page 90

• Peel the sheath (with the length shown below) at both ends of the cable, and expose the shield braided
wire for grounding..
GOT side
130
(5.12)
Within 360
(14.17)
(c) For A8GT-C100/200/300EXSS-1
The A8GT-C100/200/300EXSS-1 is a combined product of the A8GT-EXCNB and
A8GT-C100/200/300BS.
• Cut the ground wire from the core where it protrudes from the A8GT-EXCNB..
For A8GT-EXCNB
130
PLC side
(5.12)
• Cut the ground wires protruding from both ends of the A8GT-C100/200/300BS
• Peel the sheath (with the length shown below) at both ends, and expose the
For A8GT-C100/200/300BS
A8GT-EXCNB side
Within 360
(14.17)
Ground wire (450mm)
Connect to FG of the
PLC power supply module
Ferrite core
(ZCAT3035-1330)
40
(1.57)
(1.57)
Ferrite core
(ZCAT3035-1330)
Cut
with the length shown below.
shield braided wire for grounding..
Ferrite core
(ZCAT3035-1330)
40
(1.57)
8.3 Wiring Precautions the Part which Matches the EMC Directives
GOT side
130
(5.12)
40 Within 360
(14.17)
A8GT-C100
/200/300BS side
Ground wire
40
Within 360
(14.17)
(1.57)
Ground wire (280mm)
Connect to FG of the GOT main unit
power terminal block
8.3.2 Grounding the ground cable
Unit: mm (inch)
Unit: mm (inch)
GOT side
130
(5.12)
Unit: mm (inch)
8 - 12
1
2
3
4
5
6
7
8