Code Lengths - Symbol LS 1220 Product Reference Manual

Code Lengths

To select one or two lengths for each code type:
1. Scan the desired option.
2. Scan two bar codes on the following page for each desired length. For example,
for a length of "12," scan "1" then "2." For a length of "3," scan "0," then "3."
Always scan two bar codes for each length.
3. To change a selection, scan CANCEL.
Note:For additional information on Code Lengths see Code Lengths on
page 8-6.
I 2 OF 5 1 DISCRETE LENGTH
I 2 OF 5 2 DISCRETE LENGTHS
Parameter Menus
D 2 OF 5 1 DISCRETE LENGTH
D 2 OF 5 2 DISCRETE LENGTHS
9-5