Connections; Reference List - Nortel Meridian 1 Manual

Connections

Reference list

The following are the references in this section:
• Telephone and attendant console installation (553-3001-215)
All cables, except cables to connectors C and D of carrier shelves, are
terminated and designated as described in Telephone and attendant console
installation (553-3001-215). Connector C and D cables are terminated as
shown in Tables 3 and 4.
Wiring to a QUA1 emergency transfer unit is cross-connected as shown in
Figure 13 and Table 4.
Sets and consoles are cross-connected to PE shelves as described in
Telephone and attendant console installation (553-3001-215).
Connections for 500-type telephones and trunks that connect through
emergency transfer units are given in Figure 13. A ring ground start button
must be provided on these telephones if the trunks are ring ground start.
RPE local and remote carrier shelves are cross-connected to the digital carrier
cable pairs as shown in Figures 14 and 15.
RPE maintenance pairs are cross-connected as shown in Figure 16.
RPE Description, installation, and testing
Page 43 of 60