Qpc65 Remote Peripheral Switch Card; Qpc66 2 Mbaud Converter Card - Nortel Meridian 1 Manual

QPC65 Remote Peripheral Switch Card

QPC66 2 Mbaud Converter Card

Function
Each SL-1 loop at a remote site has a remote peripheral switch (RPS) card
associated with it. The card provides:
— shelf, card, and line enables, along with the bypass bit to the shelves it
serves at the remote site
— cyclic scanning of the terminals it serves for incoming signaling
messages
— monitoring of timeslot 0 for outcoming messages from the peripheral
signaling (PS) card to the RPS or terminal
— assembling of incoming messages (RPS to PS)
Quantity
One is required for each network loop.
Location
Place the QPC65 in the following positions:
— slot 1 for the first network loop in the remote carrier shelf
— slot 5 for the second network loop in the remote carrier shelf
Function
The QPC66 converts two carrier loops into a single SL-1 loop.
Quantity
Two are required for each network loop: one in the local carrier shelf, and one
in the remote carrier shelf.
Location
Place the QPC66 in the following positions:
— slot 3 for the first network loop in each carrier shelf
— slot 7 for the second network loop in each carrier shelf
Equipment description
RPE Description, installation, and testing
Page 19 of 60