Troubleshooting - Ryobi RY42102 Operator's Manual

Problem
B a r a n d c h a i n C h ec k c h a in te n -
running hot and sion for over tight
smoking. condition
Chain oil tank empty.
Motor runs, Chain tension too
but chain is not tight.
rotating.
Check guide bar and
chain assembly.
Check guide bar and
chain for damage.
Motor runs, chain Dull chain.
rotates but does
Chain on backwards.
not cut.
Chain tension ad- Tip of guide bar is not
justment ring is raised.
difficult to turn.
Chain cover lock knob
is too tight.
This product has a Three-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

TROUBLESHOOTING

Possible Cause
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment to ensure
or call (toll free) 1-800-860-4050.
Page 34 — English
Tension chain. Refer to Adjusting Chain Tension ear-
lier in this manual.
Check oil tank.
Retension chain, Refer to Adjusting Chain Tension
earlier in this manual.
Refer to Replacing Bar and Chain earlier in this manual.
Inspect guide bar and chain for damage.
Sharpen chain.
Reverse direction of chain.
Raise tip of guide bar while rotating tension adjustment
dial.
Press in the chain cover lock knob and rotate coun-
terclockwise to slightly loosen the chain cover before
attempting to adjust chain tension.
CALL US FIRST
call the RYOBI Help Line!
your complete satisfaction.
Solution