Auto-area AF/AF-area mode/3D-tracking indicator. This indicator lets you
▶
know if the Auto AF-area mode or 3D-tracking is selected and in use.
HDR indicator (
▶
High Dynamic Range images. You can set this option in the Shooting menu (
Note that this can only be enabled when shooting JPEG.
Multiple exposure indicator. This icon informs you that the camera is set to
▶
record multiple exposures. You set multiple exposures in the Shooting menu (
Bracketing indicator. When the D7100 is in the exposure or fl ash bracketing
▶
setting, this indicator appears on the control panel; when the D7100 is using
white balance bracketing, a WB icon (
D-Lighting bracketing, the ADL indicator (
in Custom Setting menu (
Bracketing progress indicator. This indicator shows you your place in the
▶
bracketing sequence when Auto-bracketing is turned on.
Exposure Compensation indicator (
▶
panel, your camera has exposure compensation activated. This affects your
exposure. Adjust the exposure compensation by pressing the Exposure
Compensation button (
Thousands indicator. This icon lets you know that there are more than 1,000
▶
exposures remaining on your memory card.
Remaining exposures. By default, this indicator displays the number of remain-
▶
ing exposures. It also displays a few other things, depending on the mode and
what buttons are being pressed, as follows:
•
Buffer. When you half-press the shutter-release button, the indicator displays
the number of shots remaining until the buffer is full.
•
Capture mode (
connected to a computer through the USB (PC) port and other settings
when using Capture Control Pro 2 or the WT-4 wireless transmitter.
•
ISO sensitivity. This is the ISO sensitivity setting number.
•
Preset white balance recording. When recording a custom white balance,
the indicator fl ashes PRE (
•
Active D-Lighting amount. This only appears when Active D-Lighting is
assigned to the Function (
displays the current setting (Auto, Off, HP [Extra High], H [High], n [Normal],
L [Low]).
Chapter 1
Exploring the Nikon D7100
). This indicator appears when the camera is set to shoot
) e6.
) and rotating the Main Command dial.
). This indicates specifi c settings when the camera is
).
) or Preview button and you press that button. It
) also appears. When it is using Active
) appears. You set Auto-bracketing
). When this icon appears in the control
1
).
).
23