Advertisement
here. The choices are 0.3, 0.7, or 1.0 EV. You can also adjust the WB Auto-
bracketing; the settings are 1, 2, or 3.
•
Number of shots per interval. When you set the D7100 to Interval timer
(
interval.
•
Maximum aperture (non-CPU lenses). When a non-CPU lens is attached
and the non-CPU lens data has been entered, this indicator displays the
aperture setting of the specifi ed lens.
•
PC mode. This indicator appears as PC when you connect the D7100 to a
computer via a USB cable.
•
HDR strength setting. When HDR is set to the
button is pressed this is where you see the HDR mode settings: Auto, Extra
High, High, Normal, or Low.
Memory card indicators (slot 1, slot 2). This indicator appears when a memory
▶
card is inserted into a slot. If a number appears in the icon, the slot contains the
active card and the images are being recorded to it. Both slots can be active
when you're using slot 2 as a backup or recording RAW to slot 1 and JPEG to
slot 2.
ISO/Auto ISO indicator. ISO (
▶
ISO sensitivity settings. Auto ISO (
is activated to let you know that the camera is controlling the ISO settings.
Interval timer/time lapse indicator (
▶
Interval timer or Time lapse option, this indicator appears in the control panel.
Remote control (ML-L3) mode ( ). This indicator is displayed when the cam-
▶
era's remote control mode is activated.
Metering mode indicator. This indicator displays the metering mode setting
▶
(Matrix (
), Center-weighted (
Flash sync indicator ( ). This indicator appears when you set your camera to the
▶
sync speed in Custom Setting menu (
auto ( ) or Manual ( ) exposure modes. To set the camera to the preset sync
speed, dial the shutter speed down one setting past the longest shutter time,
which is 30 seconds in Shutter-priority auto ( ) and Bulb (
Flexible program indicator ( ). When using Programmed auto exposure
▶
mode ( ), this indicator appears when the settings have been changed from
their default to an equivalent exposure.
22
Nikon D7100
) shooting, this indicator displays the number of frames shot in the
Digital Field Guide
) indicates that the numbers below are the
) appears when the Automatic ISO setting
). When you turn on the camera's
), Spot metering (
) e1. This is only available in Shutter-priority
or
button, when the
)).
) in Manual ( ).
Advertisement
