Advertisement
•
Number of shots in bracketing sequence. When the D7100 Auto-
bracketing feature is activated, pressing the Bracketing button (
plays the number of shots left in the bracketing sequence. This includes
white balance, exposure, and fl ash bracketing.
•
Number of intervals for interval timer photography. When you set the
camera to use the interval timer for time-lapse photography, this displays
the number of shots remaining in the current interval.
•
Non-CPU lens focal length. When you set the camera's Function button
(
) to choose a non-CPU lens number when the Function button (
pressed, the focal length of the non-CPU lens appears. You must enter the
lens data in the Setup menu ( ).
MB-D15 battery indicator. When the MB-D15 battery grip is attached and the
▶
camera is using the battery installed in the grip, this icon appears.
Battery indicator. This display shows the charge remaining on the active battery.
▶
When this indicator is blinking, the battery is dead and the shutter is disabled.
Flash modes. These icons denote which fl ash mode you are using. The fl ash
▶
modes include Red-Eye Reduction (
Slow Sync (
mode, press the Flash mode button and rotate the Main Command dial.
Autofocus mode. This indicator lets you know which focus mode is being used:
▶
AF-A (
), AF-C (
Image size. When you're shooting JPEG or RAW + JPEG fi les, this indicator
▶
tells you whether you are recording Large, Medium, or Small fi les. This display is
turned off when shooting RAW fi les.
Image quality and compression. This indicator displays the type of fi le format
▶
you are recording. You can shoot RAW or JPEG. When you're shooting JPEG or
RAW + JPEG, it displays the compression quality: FINE, NORM, or BASIC.
WB fi ne-tuning indicator. When the white balance fi ne-tuning feature is acti-
▶
vated, this asterisk appears. You can fi ne-tune WB by pressing the White
balance button (
WB setting indicators. This shows you which white balance setting is currently
▶
selected by displaying the white balance setting icon.
Aperture stop indicator. This icon appears when a non-CPU lens is attached
▶
without the non-CPU lens data being entered. This indicates that the numbers
next to it are not aperture settings but aperture stops starting from F0, which is
wide open.
20
Nikon D7100
Digital Field Guide
), and Rear-Curtain Sync (
), or AF-S (
).
) and rotating the Sub-command dial.
), Red-Eye Reduction with Slow Sync ( ),
). To change the Flash sync
) dis-
) is
Advertisement
