Advertisement
appears when in Manual exposure ( ) and when exposure compensation (
applied. This display also doubles as a roll indicator for the Virtual horizon feature
that allows you to ensure your camera is level, which is great when shooting
landscapes. When the camera is tilted to the right, the bars appear on the left.
When the camera is tilted to the left, the bars appear on the right. When the
camera is level, a single bar appears directly under the zero. To use this feature,
you must assign the Virtual viewfi nder horizon to either the Function button (
or the Preview button.
Flash compensation indicator (
▶
pensation is on. You adjust FEC by pressing the Flash mode button ( ) and rotat-
ing the Sub-command dial.
Low battery warning (
▶
When the battery is completely exhausted, this icon blinks and the shutter-
release is disabled.
Auto-bracketing indicator (
▶
is engaged.
Exposure Compensation indicator (
▶
vated this icon is displayed. When the Exposure Compensation button (
pressed and the Main Command dial is rotated, the icon changes to show
whether exposure is being added to (
ISO sensitivity indicator (
▶
appears next to the ISO sensitivity setting, letting you know that the numbers
you are seeing are the ISO numbers.
Auto ISO indicator (
▶
activated to let you know that the camera is controlling the ISO settings. You
can turn on Auto ISO in the ISO sensitivity settings, located in the Shooting
menu (
), or by pressing the Thumbnailplayback/ISO button (
ing the Sub-command dial.
Exposures remaining/WB preset/exposure and fl ash compensation value/
▶
ISO sensitivity/Active D-Lighting amount/AF-area mode. By default, this set
of numbers lets you know how many more exposures can fi t on the memory
card. The actual number of exposures may vary according to fi le information and
compression. When you half-press the shutter-release button, the display
changes to show how many exposures can fi t in the camera's buffer before the
buffer is full and the frame rate slows down. The buffer is in-camera RAM that
stores your image data while the data is being written to the memory card. This
also shows the WB preset recording indicator (
pensation (
18
Nikon D7100
). This indicator appears when the battery is low.
). When you press the ISO button, this indicator
). This indicator appears when the Auto ISO setting is
) values and fl ash compensation (
Digital Field Guide
). When this indicator appears, Flash com-
). This indicator appears when Auto-bracketing
). When exposure compensation is acti-
) or reduced (
), as well as the exposure com-
) values. You can also program
).
/
) and rotat-
) is
)
) is
Advertisement
