Table of Contents
Advertisement
HELP 5: The Method of Attachment of FP-909 Flexible Board
1 Apply folds to the FP-909 flexible board as shown in
the figure below.
2 Stick adhesive tapes.
3 Match the position of the hole, and stick adhesive
tapes.
4 Paste the JN copy sheet.
1 Mountain fold
1 Mountain fold
2 Adhesive tape
3 Adhesive tape
Match the position
of the hole
4 JN Copy Sheet
HDR-TG1/TG1E/TG3E_L2
2 Adhesive tape
1 Valley fold
1 Valley fold
5 Install the hinge clamp to the FP-909 flexible board.
6 Install the hinge assy to the hinge clamp.
5 Hinge clamp
7 Rotate the hinge assy.
8 Match the position of the boss, and stick adhesive
tapes.
9 Rotate the hinge clamp, and fix the FP-909 flexible
board.
8 Boss
0 Install the hinge cover (rear).
Note: Confirm the FP-909 flexible board is fixed.
qa Tighten the screw.
0 Hinge cover (rear)
qa Screw
6 Hinge assy
7
9 Hinge clamp
HELP
Advertisement
Table of Contents
