Sony HDR-TG1 Service Manual page 24

HELP 4: The Method of Attachment of ST-186 Board
1 Apply folds to the FP-915 flexible board as shown in
the figure below.
2 Install the FP-915 flexible board to CN7503 of
ST-186 board.
CN7503 of ST-186 Board (Side A)
1 Fold
1 Fold
3 Install the FP-912 flexible board to CN7501 of
ST-186 board.
HDR-TG1/TG1E/TG3E_L2
2 FP-915 Flexible Board
CN7501 of ST-186 Board (Side B)
3 FP-912 Flexible Board
4 Prepare the stand of about 20 mm in height, and
set it as shown in the figure below.
5 Install the FP-915 flexible board to CN1112 of
MD-137 board.
6 Insert the claw of ST-186 board in the main frame.
7 Tighten the screw.
6 Claw
7 Screw
5 FP-915 Flexible Board
CN1112 of MD-137 Board (Side A)
8 Install the FP-912 flexible board to CN1026 of
VC-522 board.
CN1026 of VC-522 Board (Side A)
ST-186 Board
About 20 mm
4 Stand
8 FP-912 Flexible Board
HELP