Honda GOLDWING GL1800/A 2015 Owner's Manual page 242

If You Have a Flat Tire
Installation
1. Reassemble the removed parts in the reverse order of removal.
2. Tighten the rear wheel nuts to the specified torque:
80 lbf·ft (108 N·m , 11.0 kgf·m)
3. After installing the wheel, apply the brake several times and then check if the
wheel rotates freely. Recheck the wheel if the brake drags or if the wheel does
not rotate freely.
If a torque wrench is not used for installation, see your dealer as soon as
possible to verify proper assembly. Improper assembly may lead to loss of
braking capability.
240
Taking Care of the Unexpected