Honda GOLDWING GL1800/A 2015 Owner's Manual page 170

Side Cover Removal
Refer to Safety Precautions on
The left side cover must be removed for battery and fuse maintenance.
Failure to use extreme care removing or installing the side covers may damage
the side cover prongs.
Removal
1. Open the saddlebag
2. Pull the side cover out until the prongs A are clear of the frame grommets.
3. Carefully pull the side cover out until the prongs B are clear of the frame
grommets.
4. Carefully remove the side cover.
Installation
1. Insert the top edge of the side cover under the seat.
2. Position the side cover so the prongs on the inside of the cover are lined up
above their securing grommets.
3. Push the cover in place.
4. Close the saddlebag.
LEFT SIDE
grommets
page 154.
(page 53).
grommets
Cover Removal
side cover
prongs B
Servicing Your Honda
prongs A
167