Side Stand - Honda GOLDWING GL1800/A 2015 Owner's Manual

Side Stand

Refer to Safety Precautions on
LEFT SIDE
side stand spring
• Check that the side stand assembly is working properly. If the side stand is
stiff or squeaky, clean the pivot area and lubricate the pivot bolt with clean
grease.
• Check the side stand spring for damage or loss of tension.
• Check the side stand ignition cut-off system:
1. Sit on the motorcycle and put the transmission in neutral.
2. Raise the side stand.
3. Start the engine.
4. Pull the clutch lever in.
5. Shift the transmission into gear.
6. Lower the side stand all the way.
The engine should stop as you lower the side stand. If the engine doesn't stop,
see your dealer for service.
208
Servicing Your Honda
page 154.