Turning Off The Operation Indicators During Wireless Connection (Lighting Settings); Pairing The Sc-Gnw10 And The Transmitter Again; Changing Settings Using The App For Use In Windows (Soundslayer Engine) - Panasonic SOUNDSLAYER SC-GNW10 Owner's Manual

Turning off the operation indicators during wireless connection (lighting settings)

Changes the on/off setting for the operation indicators (cyan) that indicate SC-GNW10 is connected wirelessly
to the transmitter.
(Factory default: on)
1
Unplug the USB cable of the transmitter.
2
Press and hold the
(blue).
• Operation indicator (L) and operation indicator (R) blink once: Off setting
• Operation indicator (L) and operation indicator (R) blink twice: On setting
Note:
• The setting is maintained until it is changed again.
• You can also switch the lighting settings using the app for use in Windows (

Pairing the SC-GNW10 and the transmitter again

If wireless connection between the SC-GNW10 and transmitter is not possible, wireless connection can be
achieved by pairing the units again.
1
Press and hold the [-PAIRING] button on the transmitter.
• The operation indicator on the transmitter blinks rapidly (cyan).
Do the following procedure with the power of the SC-GNW10 off.
2
Press and hold the [Í] button for about 6 seconds until the operation indicator (R)
blinks (blue) rapidly.
• Wireless connection pairing between the SC-GNW10 and the transmitter starts.
When the wireless connection is completed, the SC-GNW10 and the transmitter are in the following states:
SC-GNW10
Transmitter

Changing settings using the app for use in Windows (SOUNDSLAYER Engine)

If the transmitter is connected to a PC, you can use the app for use in Windows to change the settings for the
SC-GNW10.
• Equalizer settings
• Adjusting speaker balance
• Turning off the operation indicators (lighting settings)
• Updating software
etc.
Refer to the following website for details about the app:
https://panasonic.jp/support/global/cs/audio/download/sse/
(This site is in English only.)
Note:
• This app does not support Apple/macOS.
[ ]
button for about 5 seconds until the operation indicators blink
Operation indicator (L)
Operation indicator (R)
Operation indicator
Operation
l
16
16).
Lights (cyan)
Lights (cyan)
Lights (cyan)