First Installation; Batteries Installation - Watts Industries BT-DPRF-02 User Manual

1: Current day of the week
2: Operating mode menu (active mode is framed).
Program number or parameter number if "4" is
3:
displayed.
4: Installation Parameter menu.
5: RF transmission logo.
6: Type of sensor used and temperature
Regulation => Internal or external sensor.
Regulation => Floor sensor.
(Only available with receiver)
Regulation => Internal sensor with Floor
limitation.(Only available with receiver)
7: Heating demand indication.
8: Low batteries indicator.
9: °C or °F unit indicator
10: Setting or measured temperature if "5" is
displayed. Parameter value if "4" is displayed.
11: Temporary override function activated.
12: Time or parameter title if "4" is displayed.
13: Program of the current day
(the current time bar blinks)
14: Pictogram for program creation, program state in
normal operating mode.
15: Key lock indicator.
2

First Installation

This section will guide you to set up your thermostat for the
first time.
2.1

Batteries installation

- Open the two side's covers and Insert the 2 AAA Alkaline
supplied batteries (or remove the small protection sticker if
the batteries are already installed in the compartment)
- Close the two side's covers.
- Now your thermostat will propose you to adjust the
current time and date.
7
displayed.