Watts Industries BT-DPRF-02 User Manual page 25

My thermostat seems to work correctly but the
heating doesn't work correctly
Output
RF
communi
cation
My thermostat seems to work correctly but the
temperature in the room was never in accordance
Program
On the receiver:
- check the good reception of RF
signal.
- Check the connections.
- Check the power supply of the
heating element.
- Contact your installer.
- Check the following points :
- The receiver must be put at a
minimum distance of 50cm of all
others electrical or wireless materials
(GSM, Wi-Fi..)
- The receiver shouldn't be fixed on a
metallic part or too close of hydraulic
pipes... (Copper...)
with the program.
- Check the Clock.
-The difference between Comfort &
Reduced temperature is too high?
- The step in the program is too
short?
- Your installation use an energy
saver, check the correct working.
- Contact your installer, to check &
adjust the regulation parameters with
your heating system.
25