Watts Industries BT-DPRF-02 User Manual page 16

nd
- 2 choice is to choose the leaving icons, to add another
step to the program during the day.
When the choice is made, press (OK) to valid and you can
adjust the hour of this step with (-) or (+),
Press (OK) to validate and finish the edition of the first day.
Now you can choose to copy the program day just created
to subsequent days.
Change the choice "Yes" or "no" with (-) or (+) and validate
your choice with (OK).
- If you select "no", you will be invited to create a program
for Tuesday (repeat the previous method to built it.)
- If you select "Yes", you will have the possibility to copy
the program to the following day (on Tuesday on
Wednesday... up to the last day of the week
(7 Sunday).
When you press (OK) on the last day (7 Sunday) you will
be invited to "SAVE" your program.
Then the message "Save" and blinking green LED
appears:
Press (OK) key to save your program and return to AUTO
operating mode following your user program.
Press the escape key ( ) to erase your user program
changes and come back to operating mode.
16