Table of Contents
Advertisement
10. Press (Down arrow)
to select the *3 Boot Counter Reset option.
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
11. Press (Enter button)
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
Press enter
12. The Boot Counter Reset final screen will appear as shown:
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
Boot Count Reset is done
FMP-X10
SECTION 3 - UPDATES AND ADJUSTMENTS
twice and then (Enter button)
as required on screen.
NETWORK TEST
1.
After accessing Service Mode, press (Cue button)
the 004 NETWORK item shows on screen.
DIGITAL
003 DIG_SRV_MODE
004 NETWORK
2.
Press (Play button)
DIGITAL (DIG_SRV_MODE) SERVICE
NETWORK
*1 Display Information
3.
Press (Enter button)
DIGITAL (DIG_SRV_MODE) SERVICE
NETWORK
*1 Display Information
Press enter
4.
Network information screen will appear as shown:
DHCP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
MAC Adress
LINK
SERVICE
to enter the 004 NETWORK item.
as required on screen.
: OFF
: 192.168.0.11
:
:
:
:
: D8:12:56:98:CF:22
: OFF
until
22
Advertisement
Table of Contents
