Removing The Fans; Removing The Inner Panel Assembly; Removing The Pf-1001 Board; Removing The Wireless Lan Card - Sony FMP-X10 Repair Manual

SECTION 2 - DISASSEMBLY/PART NUMBER INFORMATION

REMOVING THE FANS

1. Locate the first Fan, PWM and slide it right as shown to detach from
the Main Chassis.
2. Locate the second Fan, PWM and slide it left as shown to detach from
the Main Chassis.

REMOVING THE INNER PANEL ASSEMBLY

1. Locate all Upper, Side and Bottom clips from the Inner Panel Assembly.
Upper Clips Upper Clips
2. Unclamp all the clips shown above and lift the Inner Panel Assembly
to detach.
FMP-X10
Fan, PWM Fan, PWM
Side Clips Side Clips
Bottom Clips Bottom Clips
Inner, Panel Assy Inner, Panel Assy

REMOVING THE PF-1001 BOARD

1. Locate and remove the LVDS Cable and 2 screws.
2. Remove the PF-1001, Board as shown in the illustration.
PF-1001, Board PF-1001, Board

REMOVING THE WIRELESS LAN CARD

1. Locate and disconnect 1 connector from the Wireless LAN Card.
2. Remove 1 screw and lift the Wireless LAN Card as shown to detach.
WLAN, Card WLAN, Card
14