Table of Contents
Advertisement
56
Chapter 3
Award BIOS
Parameter
Wake on LAN/
Modem
Primary INTR
IRQ [3-7,12-14]
IRQ [8,15]
IRQ [9-11]
Description
This option allows you to enable or
disable the wake on LAN/modem
function. When Enabled, internal
modem/LAN card can wake up the
system from shutdown or suspend
mode.
This item is used to enable or disable
the detection of IRQ3-15 or NMI
interrupt events for power down state
transition. Normally, this is applied to
the network card.
Select Primary or Disabled option to
enable or disable the detection of
each specified IRQ. If the Secondary
option was selected, the system will
wake up for 2ms after detecting the
interrupt, and then return to power
down status.
Select Primary or Disabled option to
enable or disable the detection of
each specified IRQ. If the Secondary
option was selected, the system will
wake up for 2ms after detecting the
interrupt, and then return to power
down status.
Select Primary or Disabled option to
enable or disable the detection of
each specified IRQ. If the Secondary
option was selected, the system will
wake up for 2ms after detecting the
interrupt, and then return to power
down status.
Options
Enabled
Disabled
ON
OFF
Primary
Secondary
Disabled
Disabled
Primary
Secondary
Secondary
Disabled
Primary
Advertisement
Table of Contents
