Table of Contents
Advertisement
Parameter
Description
Doze Mode
This item lets you set the period of
time after which the system enters
into Doze mode. The system activity
(or event) is detected by monitoring
the IRQ signals or other events (such
as I/O).
Suspend Mode
This item lets you set the period of
time after which the system enters
into Suspend mode. The Suspend
mode can be Power On Suspend or
Suspend to Hard Drive, and it is
selected in the "Suspend Mode
Option".
VGA
To enable or disable the detection of
COM port, LPT, VGA , and PCI
PCI/Master
activities for power down state
transition.
HDD & FDD
To enable or disable the detection of
HDD and FDD activities for power
down state transition.
LPT & COM
To enable or disable the detection of
COM port and LPT activities for
power down state transition.
Options
Disabled
1 min.
2 min.
4 min.
8 min.
12 min.
20 min.
30 min.
40 min.
1 Hour
Disabled
1 min.
2 min.
4 min.
8 min.
12 min.
20 min.
30 min.
40 min.
1 Hour
OFF
ON
ON
OFF
LPT/COM
None
LPT
COM
55
Advertisement
Table of Contents
