Integrated Peripherals - Abit AB9 QuadGT User Manual

2.5 Integrated Peripherals

► OnChip IDE Device
► OnChip PCI Device
► Onboard PCI Device
Onboard FDC Controller
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
OnChip IDE Device
Click <Enter> key to enter its submenu:
IDE Bus Master
SATA Mode
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
IDE Bus Master
This option enables or disables the IDE bus mastering capability under the DOS environment.
SATA Mode
This item selects the mode for devices connected through SATA1~SATA6 ports.
[IDE]: The on-chip Serial ATA served as IDE mode.
[RAID]: The on-chip Serial ATA served as RAID mode.
[AHCI]: The on-chip Serial ATA served as AHCI (Advanced Host Controller Interface) mode for
advanced performance and usability.
AB9 QuadGT
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
Press Enter
Press Enter
Press Enter
Enabled
F6: Fail-Safe Defaults
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE Device
Enabled
IDE
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
Item Help
F7: Optimized Defaults
2-17