Table of Contents
Advertisement
Setting the handset
Assigning display keys / Changing assignments
The left and right display keys have a function preset by default when in idle mode. The key can
be re-assigned.
Press and hold the left or right display key in idle status . . . the list of possible key assign-
ments is opened
key is changed
Possible functions: Alarm Clock, Redial, Handset Directory . . . More functions are available in
More Functions...
The availability of functions depends on the base.
Starting a function
With the telephone in idle status:
Changing the handset PIN
The handset is protected against unauthorised use by a PIN. The handset PIN must be entered
e. g. when switching off the keypad lock.
Change the handset's 4-digit PIN (default setting: 0000):
. . . use
OK
. . . use
to enter the current PIN
OK
Handset update
The handset supports firmware updating via the DECT radio link to the base/router
(SUOTA = Software Update Over The Air).
The base/router to which the handset is registered must also support this function
(
wiki.gigasetpro.com)
If your base/router does not support this function, you can also update the firmware
via a USB cable and Gigaset Quick Sync.
The phone checks whether new firmware is available for the handset. If it is, a message is
displayed.
Start the firmware update with Yes.
Enable/disable automatic check for new firmware:
. . . use
Update
OK
54
. . . Use
to select the function
Briefly press . . . the assigned function is executed
to select
Settings
to select
Settings
Automatic Check
Availability and operation of the functions
may differ on your telephone.
OK . . . The assignment of the display
OK
System
OK
. . . use
to enter the new handset PIN
OK
System
OK
Change (
= enabled)
OK
Handset PIN
OK
Handset
Hide quick links:
Advertisement
Table of Contents
