Honda CRF450RX 2020 Owner's Manual & Competition Handbook page 43

Fuel Tank (CRF450R/RWE)
8. Check for interference between the frame and
tank, and check the cushion rubbers (14) on
both sides of the frame for hardening or cracks.
(14) cushion rubbers
Do not ride your CRF if the cushion rubbers have
been removed.
It may cause fuel tank cracking.
38
Servicing Your Honda
Installation
1. Install the fuel tank (1) on the frame.
2. Install and tighten the washers (2) and fuel tank
bolts (3) to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(2)
(14)
(1)
(1) fuel tank
(2) washers
(3) fuel tank bolts
3. Put the breather tube (4) in the steering stem
nut (5).
4. Remove the hose clamp (6) from the breather
tube.
(5)
(4) breather tube
(5) steering stem nut
5. Slide the shroud (7) toward the down so that
6. Install the shroud C bolt (11), B bolt (12) and
(3)
(2)
(12)
(13)
(7) shroud
(8) tab
(4)
(9) slot
(10) air cleaner housing cover
7. Install the seat (page 34).
(6)
(6) hose clamp
the shroud tab (8) and the slot (9) on the air
cleaner housing cover (10) is aligned.
shroud A bolt (13).
Tighten the shroud A and B bolts to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
Tighten the shroud C bolt to the specified
torque:
3.8 lbf·ft (5.2 N·m, 0.5 kgf·m)
The right and left shrouds can be installed in
the same manner.
(11)
(9)
(10)
(8)
(11) shroud C bolt
(12) shroud B bolt
(13) shroud A bolt
(7)