Honda CRF450RX 2020 Owner's Manual & Competition Handbook page 104

6. Loosen the fork damper assembly (11) using
the lock nut wrench (12), but do not remove
them.
07WMA-KZ30100
• Lock nut wrench
Do not use an adjustable wrench to loosen the fork
damper: it may damage them.
(12)
(10)
(9) fork bridge upper pinch bolts
(10) fork bolt assembly
(11) fork damper assembly
(12) lock nut wrench
7. Remove the disc cover (13) by removing disc
cover socket bolts (14).
(13)
(14)
(13) disc cover (14) disc cover socket bolts
8. Remove the front axle nut (15) and loosen the
axle pinch bolts (16) on both forks.
Pull the front axle shaft (17) out of the wheel
hub and remove the front wheel with collars
(18).
(11)
(18)
(15) front axle nut
(16) axle pinch bolts
(9)
9. Remove the brake hose clamp bolts (19), stay
A (20) and stay B (21).
10. Remove the front brake caliper mounting bolts
(22) and brake caliper (23).
• Do not support the brake caliper by the brake
hose.
• Do not operate the brake lever after the front
wheel is removed. To do so will cause
difficulty in fitting the brake disc between
the brake pads.
(16) (16)
(15) (17) (18)
(17) front axle shaft
(18) collars
Suspension
(21)
(22)
(19)
(20)
(19) brake hose clamp bolts
(20) stay A
(21) stay B
(22) front brake caliper mounting bolts
(23) brake caliper
11. Remove the fork protector socket bolts (24)
and fork protectors (25).
(25) (25)
(24)
(24) fork protector socket bolts
(25) fork protectors
Servicing Your Honda
(23)
(24)
(cont'd)
99