Honda CRF450RX 2020 Owner's Manual & Competition Handbook page 140

Installation
1. Reinstall the battery (1) in the reverse order of
removal. Be sure to connect the positive (+)
terminal first, then the negative (–) terminal.
2. Tighten the positive (+) terminal bolt (2) and
negative (–) terminal bolt (3) to the specified
torque:
1.5 lbf·ft (2.0 N·m, 0.2 kgf·m)
3. Install the battery band (4).
4. Install the positive terminal cover (5).
(3)
(1)
(4)
(1) battery (4) battery band
(2) positive (+) terminal bolt (5) positive terminal cover
(3) negative (–) terminal bolt
Battery Charging
Be sure to read the information that came with
your battery charger and follow the instructions on
the battery. Improper charging may damage the
battery.
We recommend using a charger recommended by
your lithium-ion (li-ion) battery manufacturer
which can be purchased from your dealer. These
units can be left connected for long periods without
risking damage to the battery. However, the
lithium-ion (li-ion) battery may degrade if stored
with a charger connected. Do not intentionally
leave the charger connected longer than the time
period recommended in the charger's instructions.
(5)
Using an existing lead-acid battery charger or
battery charger that is not recommended, will
damage the electrical circuits within the Li-ion
battery.
(2)
Battery
135
Servicing Your Honda