Table of Contents
Advertisement
USER GUIDE
7. Cleaning - The projector should be cleaned only as recommended,
see the Maintenance section. Disconnect the power cord from the
power outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners.
8. Non-use Periods - The power cord of the projector should be
unplugged from the outlet when left unused for a long period of time.
9. Damage Requiring Service - The projector should be serviced only by
authorized service personnel when;
the power supply cord or the plug has been damaged,
objects have fallen, or liquid spilled, into the projector,
the projector has been exposed to water or condense,
the projector does not appear to operate normally (fan not
working, noise, smell, smoke, heat etc.)
the projector has been dropped or damaged.
10. Object or Liquid Entry - Care should be taken so that objects do not
fall into the projector casing. Be careful not to spill liquids into the
inside of the projector. Do not insert metal or flammable objects into
the projector.
11. Servicing - The user should not attempt to perform unusual or
technical service to the projector. Do not open the unit. Refer all
servicing to authorized service personnel.
12. Grounding or Polarization - Precautions should be taken so that
grounding or polarization of a projector is maintained. Do not use a
three prong to a two prong adapter.
To prevent electric shock, do not use the polarized ac plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
14. Lamp Replacement - Do not attempt to replace lamp. Contact an
authorized service centre for lamp replacement.
15. Abnormality - If you detect an abnormal smell or smoke, immediately
turn off the power switch. Disconnect the power plug from the power
switch to prevent fire or electric shock.
XGA LCD MULTIMEDIA PROJECTOR
7
Advertisement
Table of Contents
