To install the wood facing:
1. Secure the wooden fence pieces (as shown
in Figure 17) with the
screws, washers, and hex nuts provided.
2. If using your own wood pieces, make sure
the countersunk holes in your fence mate-
rial are deep enough so the entire screw
head is below the fence surface.
Figure 17. Attach wooden fence assembly.
G5913Z/G7215Z Heavy-Duty Shaper
⁄
''- 18 x 1'' Phillips
5
16
Guard Cover
To mount the guard cover:
1.
Place the guard cover over the threaded
holes on top of the guard body as shown in
Figure 18.
2.
Thread the knobs into the guard body and
secure the cover.
Figure 18. Installing guard cover.
Handwheel Handle
Thread the crank handle onto the handwheel.
Figure 19. Handwheel mounted to shaper.
-19-