Parameters (Functions) And Instruction Codes Under Different Control Methods - Mitsubishi Electric 800 Series Function Manual

Parameters (functions) and instruction codes under different control methods

4.2
Parameters (functions) and instruction
codes under different control methods
The following table shows the CC-Link IE TSN communication parameters, the corresponding instruction codes, and the
availability of the parameters by control method.
For information on the instruction codes and availability of other parameters by control method, refer to the Instruction Manual
(Detailed) of the FR-A800 inverter.
Pr. Name
434 IP address 1
435 IP address 2
436 IP address 3
437 IP address 4
438 Subnet mask 1
439 Subnet mask 2
440 Subnet mask 3
441 Subnet mask 4
1130 Link speed selection
1442 IP filter address 1 (Ethernet)
1443 IP filter address 2 (Ethernet)
1444 IP filter address 3 (Ethernet)
1445 IP filter address 4 (Ethernet)
IP filter address 2 range specification
1446
(Ethernet)
IP filter address 3 range specification
1447
(Ethernet)
IP filter address 4 range specification
1448
(Ethernet)
1459 Clock source selection

These instruction codes are used to write or read parameters through CC-Link IE TSN communication.

Function availability under each control method is as follows:
: Available
: Not available

For "parameter copy", "parameter clear", and "all parameter clear", "" indicates the function is available, and "" indicates the function is not
available.

Communication parameters that are not cleared by Parameter clear or All parameter clear (H5A5A or H55AA) via CC-Link IE TSN
communication.

Position control is enabled when an MM-CF IPM motor is used with the low-speed range high-torque characteristic enabled (Pr.788 Low speed
range torque characteristic selection = "9999" (initial value)).
48
SPECIFICATIONS
Instruction
code

22 A2 4
 
23 A3 4
 
24 A4 4
 
25 A5 4
 
26 A6 4
 
27 A7 4
 
28 A8 4
 
29 A9 4
 
1E 9E B
 
2A AA E
 
2B AB E
 
2C AC E
 
2D AD E
 
2E AE E
 
2F AF E
 
30 B0 E
 
3B BB E
 
Control method

Sensorless Sensorless Sensorless
Vector Vector Vector
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
    
Parameter
PM PM PM
      
      
      
 
    
      
      
      
      
 
    
 
    
      
      
      
      
 
    
      
    