Using Hfaai; Using Hold - ADTRAN IP 712 User Manual

ADTRAN IP 700 Series Phone User Manual

Using HFAAI

Handsfree auto answer intercom (HFAAI) allows the IP phone to automatically answer calls through the
phone speaker without user intervention.
Both parties must have HFAAI enabled to make and receive HFAAI calls. If HFAAI is not
enabled on the receiving phone, the call will ring normally and must be answered
manually.
If the party being called has privacy or DND enabled, the HFAAI feature is overridden.
To make a call using the HFAAI feature, follow these steps:
1. Press the More soft key.
2. Press the HFAAI soft key. The following icon will appear in the upper left corner of the LCD
screen to acknowledge that HFAAI has been activated:
3. Dial the number or extension to initiate the call.
If answering a call to a phone with HFAAI enabled, a short tone will sound to signify someone is on the
speaker.

Using Hold

The Hold feature allows calls to be held temporarily. In Key systems, the call can be resumed from any
other station. In PBX systems, the feature is restricted to only allow the original station to resume the call.
Use the following steps to place a call on hold from either system:
1. Press the Hold function key any time during an active call. The following icon appears next to the
line key:
2. To resume the call, press the line key next to the hold icon.
6AOSUG0001-1A Copyright © 2011 ADTRAN, Inc.
Basic Features
35