3. Hardware Indicators and Connectors
3.1 LED descriptions
When modem is establishing the connection, the LED will be blinking.
When modem is connected, the LED will be on steadily.
3.2 Front Panel
Connect this connector with Type-B end of USB cable.
3.3 Rear Panel
Connect this connector with RJ-11 cable.
3.4 Connect the Related Devices
1) Connect the provided RJ-11 cable into LINE port on the real panel of the modem and
insert the other end to splitter.
2) Connect the Type-A end of USB cable to your PC.
The diagram below illustrates a connection example,
ADSL USB Modem
ADSL USB Modem
05