Mcx653435A-Hdae Specifications - Nvidia Mellanox User Manual

Safety
Regul
atory
EMC
RoHS
a. ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates
and longer cable reaches. This supplemental feature only initiates when connected to another
Mellanox InfiniBand product.
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Mellanox 100Gb/s Cable.

MCX653435A-HDAE Specifications


Please make sure to install the ConnectX-6 OCP 3.0 card in a PCIe slot that is capable of
supplying 35W.
Size: 2.99 in. x 4.52 in (76.00mm x 115.00mm)
Physi
cal
Connector: Single QSFP56 InfiniBand and Ethernet (copper and optical)
Retention Mechanism: Ejector Latch
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4, 100GBASE-KR4,
Proto
100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4,
col
40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER,
Suppo
10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
rt
InfiniBand: IBTA v1.3
Auto-Negotiation
FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port, HDR100 (2
lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Data Rate:
PCI Express Gen 4.0: SERDES @ 16.0GT/s, 16 lanes (3.0 and 1.1 compatible)
Voltage: 3.3VAUX, 12V
Powe
r
Power
Typical Power
Maximum
Power
Maximum power available through QSFP56 port: 4.55W
Temperature
Active 3.5W Cable
CB / cTUVus / CE
CE / FCC / VCCI / ICES / RCM
RoHS compliant
(a)
: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane),
Ethernet 1/10/25/40/100/200 Gb/s
InfiniBand SDR/DDR/QDR/FDR/EDR/HDR100/HDR
Cable Type
(b) Passive Cables 18.53W
Passive Cables 23.3W
3.5W Active 28.5W
Cables
Operational 0°C to 55°C
700LFM 200LFM
Active Mode
150LFM 100LFM
STBY Mode
6.6W
10.45W
15.6W
57