Mcx653436A-Hdai Specifications - Nvidia Mellanox User Manual

Environm
ental
Airflow
Safety
Regulator
y
EMC
RoHS
a. ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates
and longer cable reaches. This supplemental feature only initiates when connected to another
Mellanox InfiniBand product.
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Airflow numbers are measured while using Mellanox HDR optic cable. The maximum allowed
temperature (internal sensor) for Mellanox HDR optic cable is 75C.
MCX653436A-HDAI Specifications

Please make sure to install the ConnectX-6 OCP 3.0 card in a PCIe slot that is capable of
supplying 80W.
Size: 2.99 in. x 4.52 in (76.00mm x 115.00mm)
Physical
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Retention Mechanism: Internal Lock
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4, 100GBASE-KR4,
Protocol
100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4,
Support
40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,
10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX,
10GBASE-SR
InfiniBand: IBTA v1.3
Auto-Negotiation
lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port,
HDR100 (2 lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Data Rate:
PCI Express Gen 4.0: SERDES @ 16.0GT/s, 16 lanes (3.0 and 1.1 compatible)
Cable
Type
(d)
Active Mode@
Passive 500LFM
Cable
Active 700LFM @50C
4.55W Cable
CB / cTUVus / CE
CE / FCC / VCCI / ICES / RCM
RoHS compliant
(a)
: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per
Ethernet 1/10/25/40/100/200 Gb/s
InfiniBand SDR/DDR/QDR/FDR/EDR/HDR100/HDR
Hot Aisle - HSK to Port
STBY Mode@
55C 45C
100LFM
300LFM
Cold Aisle @35C - Port to
HSK
Active STBY Mode
Mode
200LFM 100LFM
200LFM 100LFM
54