Installation Summary; Included Parts - HP J2962A Installation And Reference Manual

Installation Summary

Installation Summary
The basic hardware installation procedure for the RPS is as follows:
1. Mount the RPS in a rack or place it on a table.
2. Connect the RPS to the devices that need redundant power.
3. Verify the RPS's operation.

Included Parts

Each RPS has the following components shipped with it:
4
HP Redundant Power Supply Installation and Reference Guide−
this manual (J2962-90001)
Two AC power cords, one of the following:
Australia/New Zealand
Denmark
Europe
Japan
Switzerland
United Kingdom
U.S./Canada/Mexico/Taiwan
Four 34-inch (86.4 cm) DC power cords (8120-6777) to connect the
supported HP devices
Accessory kit (5063-8522):
• two mounting brackets
• four 10-mm M4 screws
• four 5/8-inch number 12-24 screws
(8120-6175)
(8120-6178)
(8120-6174)
(8120-5342)
(8120-6179)
(8120-6173)
(8120-6776)