Table of Contents
Advertisement
Installation
Precautions
Save these instructions. This document contains important safety instructions that should be followed
during installation, operation, and maintenance of the UPS and batteries.
WARNING:
The installation of options and routine maintenance and service of this product must be
performed by individuals who are knowledgeable about the procedures, precautions, and
hazards associated with AC power products.
37 kg
82 lb
55 kg
122 lb
WARNING:
Do not operate the UPS while disconnected from the utility power source.
•
Disconnect load devices before disconnecting the UPS from the utility power source.
•
Preparing to install the hardware
Before installing the hardware:
Be sure the necessary tools and materials (on page 13) are available.
1.
Select an installation site
2.
Prepare the equipment
3.
Tools and materials
The following tools are required for installation:
•
Phillips screwdriver
•
10-mm hex-nut driver
The following items are supplied with the rack:
•
Screws
A risk of personal injury from electric shock and hazardous energy levels exists.
This symbol indicates that the UPS exceeds the recommended weight for one
individual to handle safely.
WARNING:
To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for
manual material handling.
This symbol indicates that the ERM exceeds the recommended weight for one
individual to handle safely.
WARNING:
To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for
manual material handling.
To prevent personal injury from earth conductor leakage current:
("Selecting a
("Readying the
site" on page 14).
equipment" on page 14) for installation in the rack.
Installation 13
Advertisement
Table of Contents
