Display Icons; Sleep Timer - Dyson pure cool link tower Operating Manual

Control
Standby
ON/OFF
Airflow control
Oscillation
ON/OFF
Attach the remote control to the top
of the appliance with the buttons
facing down.
Airflow
6
Auto mode

Sleep timer

Night mode
To operate, point the
remote control toward
the front of the base.
Select a high flow of air.
Select a low flow of air.

Display icons

Flashing green = Wi-Fi is ready to connect
to your Dyson Link app
Flashing white = Wi-Fi connecting
Solid white = Wi-Fi connected
Off = Wi-Fi disabled
Solid white = cleaning/below air quality target
Solid green = clean/air quality target has been met
Off = appliance is not in auto cleaning mode
Solid white = appliance is in night mode
Off = appliance is not in night mode
Sleep timer
To set the sleep timer, select the desired time.
When time reaches zero, the appliance will go
into standby mode. To cancel, reduce the time
until two dashes appear.