3Com 3C421600A Quick Setup Manual page 25

Initial Configuration from PCs Running Microsoft Windows 95, 98, or NT
2 Click Configure IP Address. The IP Address Configuration Wizard Screen
appears as shown in Figure 2-2.
If the PC does not auto run the CD, perform the following:
a At the Windows 95, 98, or NT desktop, click Start, then click Run.
b In the Run dialog box, type:
c Click OK, then click Configure RAS1500.
Figure 2-2 IP Address Configuration Wizard
3 In the MAC Address list, select the RAS 1500 to which you want to assign
an IP address. This list contains devices that are connected to the same
LAN segment as the workstation and do not have an IP address.
The RAS 1500's MAC Address is printed on a sticker on the rear of the
unit.
<your CD drive letter>:\setup
2-3