Table of Contents
Advertisement
30
C
4: W
HAPTER
ORKING
Accessing the Web
Interface
Exiting the Web
interface
W
W
I
ITH THE
EB
NTERFACE
To access the Web interface over the network, complete the following
steps:
1 Ensure that your network is correctly set up for management using the
Web interface and open your Web browser.
2 In the Location field of the browser, enter the URL of the Server Load
Balancer. This must be in the format:
http://nnn.nnn.nnn.nnn/
where
nnn.nnn.nnn.nnn
IP Address" on page 24.
When the browser has located the Server Load Balancer, the Enter
Network Password window appears.
3 Enter admin in the User Name field.
The Server Load Balancer provides two levels of access, admin and
monitor. The password field contains a blank default login password. The
two levels of access are:
admin — the user can access and change all manageable
I
parameters
monitor — the user can view all manageable parameters, but
I
cannot change any parameters
4 The password field contains a blank default login password. Hit
<Return>.
CAUTION: The Server Load Balancer does not provide a way to recover a
lost password. If you choose to assign a new password, it is suggested
you keep note of it in a safe place. If you forget your password, you will
be locked out of the unit. If you change the password during the CLI
Server Load Balancer setup, this is the password you should use, and not
the blank default login password. For Technical Support, see Appendix C.
The main Web interface is displayed. See "Using the Web Interface" on
page 31.
You can exit the Web interface at any time; to do this, close your Web
browser. For security reasons, you should always close your Web browser
after a management session.
is the IP address you assigned in "Assigning an
Advertisement
Table of Contents
