Table of Contents
Advertisement
6
R
ELEASE NOTE INFORMATION
Web Browser
Requirements
Solaris and Linux
Operating Systems
Reset To Factory
Defaults
Configuration
Issues
Balancer Plus. If the JRE program is missing, you will be prompted to
install it. See the Server Load Balancer and Server Load Balancer Plus
User Guide for information.
For an up to date list of supported operating systems and browser
releases, refer to the 3Com Web site at http://www.3Com.com. Click
Support for Products for more information.
The Web Interface requires a Web browser such as Netscape Navigator®
version 4.5 or above or Microsoft® Internet Explorer, version 5.0 or
above.
Netscape version 4.77 is not supported at this time.
If you do not have a Web browser installed, you must do so before
installing and configuring the Server Load Balancer and Server Load
Balancer Plus. For more information on Netscape or Microsoft Internet
Explorer, refer to the manufacturer's Web sites located at:
http://www.microsoft.com or http://www.netscape.com.
For information on Solaris™ and Linux™ operating systems go to the
following URL:
http://support.3com.com/infodeli/tools/switches/ss3/
family.htm
You should be careful when returning the Server Load Balancer and
Server Load Balancer Plus in a redundant configuration back to factory
defaults. In a redundant configuration, topological loops are inherent in
the deployment.
Special consideration of the attachment of servers using L2 devices to the
Server Load Balancer and Server Load Balancer Plus should be made to
remove links that create loops among the devices.
When configuring for redundant operation, avoid loops until the
configuration is complete.
The following are issues related to the configuration of the Server Load
Balancer and Server Load Balancer Plus.
Advertisement
Table of Contents
