3Com OfficeConnect 3C886A Release Note page 8

8 O C 56K LAN M
FFICE ONNECT
R N V. 7.2.0
ODEM ELEASE OTE
3 Select Single User and click Next.
The Username and Password page appears, as shown in Figure 4.
Figure 4 Dial-In WIzard Username and Password Screen
4 Enter a unique name and password to identify and verify this dial-in user when
dialing into this LAN Modem. Note that this will match the username and
password configured on the client device which dials in to this LAN Modem.
5 Click Next.
The Congratulations page opens, indicating the successful creation of a dial-in
user.
6 Click Continue.
This completes the dial-in configuration for single user. To continue setting up your
LAN Modem for dial-in access, go on to "Configuring the Client Site".
LAN Modem Site-to-Site Dial-In Wizard Instructions
1 From the LAN Modem main configuration page, click Dial-in.
2 Click Dial-in Wizard.
3 Select LAN Modem Site-to-Site and then click Next.
The Username and Password page appears.
4 Enter a unique name and password to identify and verify this dial-in user when
dialing into this LAN Modem. This will match the username and password which
will be entered in the client LAN Modem's service provider profile.
5 Click Next.