3Com OfficeConnect 3C886A Release Note page 5

56k lan modem v. 7.2.0

Hide thumbs Also See for OfficeConnect 3C886A:

2 Click Dial-in Global .

Figure 2 Dial-In Global Parameters Screen

1 If you are planning to use the Callback feature, use the Callback Preﬁx ﬁeld to

enter the number required to get an outside line, such as a 9. Otherwise, leave this

ﬁeld blank.

2 In the LAN to LAN Site Number, designate the LAN Modem site for dial-in access

from other LAN Modems which will employ the LAN Modem Site-to-Site scenario.

Note that setting the site number may change the IP address of the LAN Modem,

as described below.

Choose None (the default) to leave the LAN Modem's IP address unchanged.

You might choose None if you will never employ the LAN Modem Site-to-Site

scenario with this LAN Modem (that is, all your dial-in users will employ the

Single-User Dial-in scenario, and do not require LAN-to-LAN connectivity), or

an advanced user might choose None if the IP address of the LAN Modem has

been manually conﬁgured for static IP addressing.

Choose Site A to designate this LAN Modem's IP address as 192.168.1.1 (the

LAN Modem default IP address).

Choose Site B if this LAN Modem will place or receive calls to another LAN

Modem which has been conﬁgured as Site A. Choosing Site B will change this

LAN Modem's default IP address to 192.168.2.1

For example, if you have already designated a remote LAN Modem as

Site A, and you are now setting up a second LAN Modem for LAN-to-LAN

connectivity, you would designate this second LAN Modem as Site B. This

will differentiate between the two LAN Modem IP addresses, which by

default are the same.

Configuring the Server LAN Modem