Advertisement
SW Buttons
Those buttons are located above the just mentioned Joystick and are per-setted with
typical synthesizer functions.
Their LED will lit when the assigned function is active, so you will always have the visible
control about the current setting. On the Kronos Analogicsoundbank the default position
usually is Off. Push the button to turn the function on.
SW1 Octave down
The SW1 Button delivers an instant Octave down shift and acts like a typical Key
Transpose function with a fixed amount.
SW2 Ribbon Position fix
As the below described Ribbon's typical assignment is Filter Cutoff it is handy to get the
chance to fix a Cutoff amount at any Ribbon position. Push the SW2 Button while holding
the Ribbon's position with the other finger and the current position will be fixed until you
push the SW2 Button once again. The SW2 LED will lit when the function is in mode On.
Advertisement
