Static Routes - 3Com 3CRWER300-73 User Manual

Static Routes

You can configure static routes in this screen. You can setup a static route
that will get all traffic with destination to business network to go through
VPN tunnel and the rest outside of the VPN tunnel.
Figure 77 Static Routes Screen
To add a static route entry to the table, click Add (see
To change an existing entry, click Edit. To delete an entry, click Delete.
Figure 78 Add Static Route Screen
Enter the following information:
■
■
A network address of 0.0.0.0 and a subnet mask of 0.0.0.0 indicates the
default route.
Network Address — the network address of the static route.
Subnet Mask — the subnet mask of the route.
Advanced 97
Figure 78).