EAGLEHAWK NX CONTROLLER
Basic procedures are:
Displaying HOME Menu and/or Fast Access List
Calling up Menus and Sub Menus
Navigating through Menus, Sub menus and Lists and Highlighting Items
Selecting Items
Adjusting and Saving Values and Options
Enable/Disabling Options
Working with Command Symbols and Soft keys
Saving Settings
Canceling Changed Settings
These are described in the following sections of the same name.
The initial screen of the EAGLEHAWK NX controller can be explicitly displayed
during operation on the HMI by pressing the Home key
The HOME screen is displayed by default if no operating key has been pressed for
the time in minutes defined as auto logout delay (default = 1 minute).
Example:
Calling up the General menu.
Procedure
1. In the HOME screen, turn the rotate&push button to navigate to and highlight
the General menu icon
The General menu symbol appears larger and the menu name is displayed
in the middle of the bottom section.
2. Then push the rotate&push button. The GENERAL menu is displayed.
BASIC OPERATION PROCEDURES
Viewing and Editing Information
Calling up Menus and Sub Menus
.
17
Displaying Home Screen
.
EN2Z-1053GE51 R0119